Minolta PI4700E Manual do Utilizador descarregar pdf (Página 26)

Di470

Description

A C-0210 error code may be indicated if the Image transfer/paper separator corona is installed before developing unit.

Solution

CAUSE: If these parts are installed in this order, the connector of corona is not securely plugged into the holder.

SOLUTION: Mount the developing unit first, next mount the image transfer/paper corona to release a C0210 code. If these parts are not installed in this

order, the connector of corona is not securely plugged into the holder.

Solution ID

Solution Usage

TAUS0645790EN*

Description

What is the part number for the staple cartridge for the FN-106? When I ordered staples it did not come with a new cartridge.

Solution

The part number for the cartridge is 4644-7802-01 and should not be discarded but retained after the staples run out. Bulletin 3249 provides additional

information.

Solution ID

Solution Usage

TAUS0645820EN*

Description

How to program the Y and Z coordinates when replacing the print head.

Solution

SOLUTION: Please refer to Bulletin 3426 for details on laser diode bias adjustments required when installing a new print head.

Solution ID

Solution Usage

TAUS0645844EN*

Description

How to troubleshoot C-0F32 errors.

Solution

SOLUTION: Perform the following:

1.Check the connection between the PWB-A and the ATDC.

2. Check the voltage between PJ7A-10B and ground. Voltages should range between 0.5vdc and 4.5vdc during the copy cycle.

3. If the voltages fall in this range replace the PWB-A.

4. If the voltages do not fall in this range replace the ATDC sensor.

Please see the Field Service Manual (approx. 4 MB) for additional details.

Note:

To view the above PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* web site at:

[[http://www.adobe.com/products/acrobat/readstep2.html| URL http://www.adobe.com/products/acrobat/readstep2.html]]

* Trademark ownership information

Solution ID

Solution Usage

TAUS0645847EN*

Description

The download library does not have the Macintosh* PPD files for the Pi4700e. From where can they be downloaded?

Solution

The Pi4700e Macintosh PPD files are:

1. Macintosh OS 7.x/9.x

2. [[Macintosh OS 10.2| URL http://techweb.konicabt.com/tpm/media/Pi4700eMAC10[1].2_US.dmg]]

3. [[Macintosh OS 10.3| URL http://techweb.konicabt.com/tpm/media/Pi4700eMAC10[1].3_US.dmg]]

* Trademark ownership information

Solution ID

Solution Usage

TAUS0645849EN*

Description

How to disable the configuration page from printing out on startup.

Solution

Follow the procedures outlined in Bulletin 3333 to download, install and execute the "Conf_chng.exe" utility. The configuration sheet will no longer print out

automatically at startup.

Notes: