Minolta X-700 Manual do Utilizador descarregar pdf (Página 19)

A handy ISO (DIN-ASA) table,

with a surrounding memo holder

for keeping the film-box end as a

reminder of the film type and

number of exposures, is located on

the camera back.

Loading film

Before opening the camera back,

confirm that there is no film inside

that could be damaged by light if

the back is opened, by checking

that:

• No red is visible in the Safe Load

Signal (see p. 20).

• Rewind crank can be freely

rotated clockwise many times

without pushing rewind button.

Since the frame counter advances

each time the shutter is cocked

even if no film is inside, the camera

may be empty even when the index

does not point to "S".

Prior to loading film, set the film

speed (see previous page) and turn

the main switch on (p. 13).

CAUTIONS

• Film should be handled and load-

ed in subdued light - at least

shaded from direct sunlight by your

body.

• Do not touch any parts or areas

shown in blue below.

LOADING AND ADVANCING FILM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 62 63

Sem comentários

Minolta X-700 Manual do Utilizador Página 19